Why TVs Fall Off the Wall, and How to Stop It

A TV that is mounted right stays on the wall. When one does come down, the cause is almost always how the mount was fixed. Here is what goes wrong and how we make sure a mount holds, for homes and businesses in Baltimore, across Maryland and the DMV.

Ellisson installer hanging from a newly fixed TV wall mount to test it
Ellisson project photo: our installer hanging from a new mount to test it before the TV goes on

Why wall-mounted TVs fall

Most falls trace back to one of a few mistakes:

  • The mount is held by drywall anchors alone. Drywall is soft, and the weight of the TV, plus the pull of a full-motion arm swung out, can work the anchors loose over time.
  • The screws miss the stud or only catch its edge.
  • The fixings don't suit the wall. Plaster, metal studs, brick and stone each need their own hardware.
  • On brick or stone, the anchors go into the mortar joints, which crumble, instead of the solid brick or stone.
  • The mount isn't rated for the TV's weight or size.
  • The TV isn't locked onto the bracket, so a bump can lift it off.
TV hanging off a wall mount that pulled loose from the wall and dropped onto the TV stand
A TV that came down onto its stand after the mount pulled out of the wall

Signs a mount is working loose

  • The TV sits crooked when it used to be level.
  • The wall plate has pulled away from the wall, or there's a gap behind it.
  • The drywall or plaster has cracked around the screws.
  • A full-motion arm sags or drifts when you let go of it.

If you see any of these, stop moving the arm and have the mount checked before the TV comes down on its own.

How we make sure your TV stays up

We fix into the studs. When they don't line up with where you want the TV, we use a wide-plate mount that lets the screen slide sideways, or a mounting board fixed across several studs. Each wall gets its own fixings: into the structure behind plaster, fixings made for metal studs on metal framing, and masonry anchors in solid brick or stone, never the mortar.

Then we load-test every mount before we leave. The photo above is one of those tests: our installer hanging from the bracket before the TV goes on. Once the TV is up, we lock it to the bracket and level it.

If you mount it yourself

Check the mount's weight and size rating against your TV before you buy it. Use lag bolts into wood studs, or hardware made for your wall type, and confirm each stud before you drill. When the TV is on the bracket, fit the safety screws or locks that hold it in place. A large TV on a full-motion arm puts the most strain on the wall, so that's the setup to have a pro fix.

Our lifetime warranty

Every installation we do is covered by our lifetime workmanship warranty. If a mount we fitted works loose, we come back and fix it. We're fully licensed and insured.

Where we mount TVs

We mount TVs in homes across Baltimore City and Baltimore, Anne Arundel, Harford, Howard, Carroll and Cecil counties, and for businesses in Washington, D.C., Northern Virginia and Southern Pennsylvania. See TV Wall Mounting, read our answers on wall types, or ask about your wall.

More Guides

Guide

Can You Mount a TV Near a Ceiling Fan?

Can you mount a TV near a ceiling fan? How we fix the mount into the ceiling, keep the blades clear and hide the wires, in Baltimore and across Maryland.

Worried About Your Mount?

Send us a photo of your wall or your current mount, and tell us the TV size.

Best way to reach you (optional)

Message us anytime. We reply every day, 7 AM to 8 PM, and plan your installation with you.